forgemax.FORGED. TESTED. PROVEN.
Testo Blend 350 350mg/ml 10ml Vial by Dragon-Pharma
Community Favorite

Testo Blend 350 350mg/ml 10ml Vial by Dragon-Pharma

4.5 (2 reviews)

Dragon-Pharma Testo Blend 350 is a four-ester injectable testosterone formulation delivering 350 mg/ml, purpose-built for athletes who co-administer selective androgen receptor modulators (SARMs) to pursue lean-mass outcomes with tightly managed androgenic load. The staggered ester release profile sustains serum testosterone within a reproducible band across the injection interval, preserving the receptor environment that SARMs depend on for additive signalling without generating erratic peaks that complicate stack management. Batch-level quality is enforced through HPLC ester-fraction confirmation and LAL endotoxin screening before any vial is cleared for distribution.

€42.00Free shipping on orders over €300
In stock
Ships within 48 h Lab-tested batch
  • Four-ester cascade sustains androgenic coverage across the full injection interval without requiring daily administration.
  • Serves as a precision hormonal floor beneath SARM compounds that cannot self-supply systemic testosterone.
  • 350 mg/ml concentration supports clean volume arithmetic for twice-weekly injection schedules.
  • HPLC-confirmed ester proportions ensure reproducible pharmacokinetic overlap across every production batch.
  • LAL endotoxin testing applied to finished product before distribution safeguards parenteral safety standards.
  • 10ml multi-dose vial delivers sufficient volume for a full SARM-plus-testosterone cycle with minimal waste.
  • Staggered ester release narrows serum peak-to-trough amplitude compared to weekly single-ester dosing, simplifying SARM-stack estrogen control.

Key takeaways

  • Stack Testo Blend 350 with SARMs to maintain physiological testosterone throughout suppression.
  • Choose 175–350 mg weekly as a base dose alongside tissue-selective SARM compounds.
  • Calibrate aromatase inhibitor to testosterone dose, not SARM dose.
  • Confirm mid-cycle serum testosterone at the steady-state midpoint between injections.
  • Plan PCT around combined SARM-plus-testosterone suppressive load, not testosterone alone.

Testo Blend 350 as a Hormonal Base in SARM-Stack Protocols

Dragon-Pharma Testo Blend 350 is a four-ester injectable testosterone concentrate formulated at 350 mg/ml specifically to serve as the androgenic foundation beneath selective androgen receptor modulator stacks, where consistent receptor occupancy matters more than raw hormonal amplitude. The four esters — testosterone propionate, phenylpropionate, isocaproate, and decanoate — deliver staggered plasma peaks that collectively maintain serum testosterone within a narrow band across a twice-weekly injection schedule. A stable androgenic baseline is the single variable that SARMs cannot self-supply: compounds such as Ostarine (MK-2866), LGD-4033 (Ligandrol), and RAD-140 (Testolone) produce tissue-selective anabolic signalling but simultaneously suppress endogenous testosterone production, making exogenous testosterone replacement during a SARM cycle a practical requirement for preserving libido, mood, and lean-tissue retention.

Why SARM Users Choose a Multi-Ester Testosterone Over Single-Ester Alternatives

Compared to testosterone enanthate administered once weekly, the four-ester architecture of Testo Blend 350 narrows peak-to-trough serum fluctuation — a clinically meaningful distinction for SARM co-administration, because erratic testosterone swings can amplify the androgenic signal in an unpredictable way and complicate estrogen management during a stack. Testo Blend 350 provides a reproducible androgenic floor; SARMs supply the tissue-selective anabolic layer above it. HPLC-verified ester proportions, confirmed on every production lot, ensure the pharmacokinetic overlap is consistent batch to batch — not just on the development reference formulation. The LAL endotoxin assay applied to finished product meets parenteral safety standards before any vial reaches distribution.

SARM Combination Principles and Dosing Arithmetic

The most widely reported SARM stacks paired with a testosterone base include Ostarine at 25 mg/day for mild tissue preservation, LGD-4033 at 10 mg/day for lean-mass accumulation, and RAD-140 at 10–20 mg/day for strength-focused cycles. Athletes using Testo Blend 350 as the base typically run 175–350 mg per week — the lower end is sufficient to counteract SARM-induced endogenous suppression without generating a supraphysiological androgenic environment that would dilute the selectivity advantage SARMs offer. A mid-cycle serum testosterone draw, taken at the steady-state midpoint between injections, confirms whether the chosen weekly dose is maintaining physiological range — data-driven management that distinguishes responsible SARM-stack practice from guesswork.

Estrogen and Suppression Management in Combined Protocols

Aromatase inhibitor co-administration should be calibrated to the testosterone dose rather than the SARM dose, since SARMs do not aromatise. Total androgen receptor occupancy across both the testosterone and SARM fractions elevates suppression severity compared to either compound alone, meaning PCT planning must account for the combined suppressive load, not just the testosterone component.

Usage

  1. Establish baseline bloodwork before starting — measure total testosterone, LH, FSH, estradiol, haematocrit, and lipid panel so mid-cycle deviations are measurable against a real pre-cycle value.
  2. Select your SARM partner based on cycle goal: Ostarine (25 mg/day) for tissue preservation and recomposition, LGD-4033 (10 mg/day) for lean-mass accumulation, or RAD-140 (10–20 mg/day) for strength-focused protocols.
  3. Draw your Testo Blend 350 dose using a 21–23-gauge needle, swabbing the vial septum with isopropyl alcohol; switch to a 23–25-gauge needle for intramuscular injection into the glute or lateral quad.
  4. Administer twice weekly (e.g., Monday and Thursday) to keep ester-overlap consistent; take your SARM orally each morning at the same time regardless of injection day.
  5. At week 4, run a mid-cycle blood panel — total testosterone (drawn at the steady-state midpoint between injections), estradiol, and haematocrit — to confirm the testosterone base is in range and estrogen management is appropriate; adjust AI dose only on bloodwork evidence, not prophylactically.
  6. Discontinue both Testo Blend 350 and the SARM simultaneously; wait 14–18 days for decanoate clearance, then initiate SERM-based PCT sized to the combined suppressiveness of the testosterone-plus-SARM stack, not testosterone alone.

Warnings

contraindications: Testo Blend 350 is contraindicated in individuals with prostate or breast carcinoma, polycythaemia vera, untreated severe obstructive sleep apnoea, or hypersensitivity to any oil-vehicle excipient. SARM co-administration does not eliminate these contraindications and in some cases (e.g., prostate sensitivity) may compound androgenic exposure in non-skeletal tissue.

side_effects: Common: injection-site discomfort, elevated haematocrit, androgenic suppression of endogenous testosterone production, acne in genetically predisposed users. SARM-specific additions to consider: the combined androgenic suppressive burden of testosterone plus a SARM is greater than either alone, potentially deepening HPG-axis suppression and extending the recovery timeline post-cycle. Fluid retention and aromatase-driven estradiol elevation remain testosterone-class effects; SARMs do not contribute to aromatisation.

monitoring: Run bloodwork at baseline, cycle week 4 (mid-cycle), and 6–8 weeks into PCT. Essential markers: total testosterone, LH, FSH, estradiol, haematocrit, and lipid panel. Haematocrit above 52% warrants dose assessment. Track estradiol within the 20–40 pg/mL range to avoid both excess estrogenic and excessively suppressed androgenic environments during the SARM stack.

pct: Because SARMs add suppressive burden on top of testosterone-class suppression, PCT should be initiated with tamoxifen or clomiphene at doses sized for moderate-to-significant HPG-axis suppression. Begin SERM therapy 14–18 days after the final Testo Blend 350 injection to allow adequate decanoate clearance. Confirm HPG-axis recovery with serial LH, FSH, and total testosterone panels at PCT weeks 2 and 6 before concluding treatment.

Frequently asked questions

Can Dragon-Pharma Testo Blend 350 be used as a testosterone base during a SARM cycle?
Yes — Testo Blend 350 is well-suited as a replacement testosterone base during SARM cycles because SARMs suppress endogenous testosterone production. Running 175–350 mg per week of Testo Blend 350 maintains physiological serum testosterone, preserving libido, mood, and nitrogen balance while the SARM delivers its tissue-selective anabolic signal above that hormonal floor.
Which SARMs are most commonly stacked with a multi-ester testosterone base like Testo Blend 350?
The most frequently reported pairings are Ostarine (MK-2866) at 25 mg/day for lean preservation, LGD-4033 at 10 mg/day for lean-mass accumulation, and RAD-140 at 10–20 mg/day for strength-focused protocols. Each SARM contributes tissue-selective anabolic activity while the multi-ester testosterone maintains the systemic androgenic environment those compounds cannot self-sustain.
What should athletes watch out for when stacking SARMs with injectable testosterone?
The primary concern is combined androgenic suppression: SARMs and testosterone both suppress the hypothalamic-pituitary-gonadal axis, so the combined suppressive load is greater than either agent alone. Estrogen management should be calibrated to the testosterone dose only, since SARMs do not aromatise. Mid-cycle bloodwork — including LH, FSH, total testosterone, and estradiol — is essential to catch over-suppression or excess aromatisation early.
How do you draw an accurate dose from a Testo Blend 350 10ml vial using a standard syringe?
At 350 mg/ml, each 0.5 ml drawn equals 175 mg and each 1.0 ml equals 350 mg of testosterone ester blend. Use a 21–23-gauge draw needle to pull from the vial, then swap to a 23–25-gauge injection needle. Wipe the rubber septum with an isopropyl alcohol swab before every draw. A 1 ml luer-lock syringe provides the graduation resolution needed for volumes between 0.5 ml and 1.0 ml.
How should a Dragon-Pharma Testo Blend 350 vial be stored after opening?
Store the opened vial at room temperature, between 15°C and 25°C, away from direct light and heat. Do not refrigerate — cold temperatures can cause the oil vehicle to thicken and the active compound to precipitate. The multi-dose vial septum is designed for repeated puncture; however, once opened, use the vial within the cycle period and inspect the solution before each draw for particulates or discolouration. (2) angle_used

Manufacturer

Dragon-Pharma's manufacturing capacity for Testo Blend 350 is defined by its compounding infrastructure: a purpose-configured multi-ester blending suite where each ester fraction is metered separately into the oil vehicle under controlled atmospheric conditions before the final combined solution advances to the sterile fill stage. The fill-and-finish line operates automated volumetric dispensing equipment validated to deliver consistent fill weight across a 10 ml vial format — a precision requirement that becomes especially consequential in SARM-combination protocols, where athletes draw repeated measured doses from a single container and any fill-weight deviation propagates across every subsequent injection in the cycle. Dragon-Pharma's production records include automated in-process fill-weight checks at defined intervals throughout each batch run, with out-of-specification events triggering immediate hold-and-investigate procedures before the affected units advance to crimping. The facility's raw-material intake process subjects each incoming ester fraction to identity verification and potency confirmation before it is released to the compounding area — a front-end quality gate that ensures the four-ester ratio specified for Testo Blend 350 is built from analytically characterised inputs rather than assumed from supplier certificates of analysis alone. Finished vials carry the Dragon-Pharma holographic security seal on the aluminium crimp, providing a tamper-evidence layer that supports supply-chain integrity from production site to end user.

Product details

BrandDragon-Pharma
Active ingredienttestosterone mix
Also known asSustanon, Omnadren, Testosterone-Mischung, Sustanon 250, Testo Blend 350, Dragon-Pharma Sustanon
Strength350 mg
FormVial
Pack size1 piece
Item numberINJ-TMIX-DRA-350-008

Reviews

4.5/5

2 reviews

  • Rating: 5 out of 5 starsgymratVerified purchase

    underrated blend, great results

    Picked this up as an alternative to sust and honestly it holds its own. 700mg/wk for 12 weeks. Gained 7kg, strength shot up, recovery was noticeably faster between sessions. Test levels at 2,900 ng/dl on mid-cycle bloods. Oil is smooth, zero PIP for me. Arrived well packaged in about 7 days.

  • Rating: 4 out of 5 starstitaniumVerified purchase

    Good blend, slightly pricey

    Results are solid, no question. Running 700mg/wk and feeling strong at week 9. Libido is good, sleep fine, no major sides. The only thing stopping five stars is the price compared to straight enanthate - you pay a bit more for the blend. Still, the convenience of one compound covering multiple esters is worth something. Would buy again.

Write a review

Your rating *

Your review will be checked before publication.

Reviews are written by users of this shop and are checked editorially before publication. Unless labelled “Verified purchase”, we do not verify that the review is based on an actual purchase.

Similar products

Sustandrol 250mg/ml 10x1ml Ampoules by Balkan PharmaceuticalsGMP Standard

Sustandrol 250mg/ml 10x1ml Ampullen by Balkan Pharmaceuticals

€42.00
Suste-Testosterone 250mg 250mg/ml 10ml Vial by Beligas PharmaceuticalsHigh Concentration

Suste-Testosterone 250mg 250mg/ml 10ml Vial by Beligas Pharmaceuticals

€39.00
Suste-Testosterone 400mg 400mg/ml 10ml Vial by Beligas PharmaceuticalsVerified Manufacturer

Suste-Testosterone 400mg 400mg/ml 10ml Vial by Beligas Pharmaceuticals

€48.00
Susten-250 250mg/ml 10x1ml Ampoules by BM PharmaceuticalsTop Seller

Susten-250 250mg/ml 10x1ml Ampullen by BM Pharmaceuticals

€42.00

Stack it with

Pairs well with these products.

Quant-Equipoise 300mg/ml 10ml Vial by Beligas PharmaceuticalsHigh Concentration

Quant-Equipoise 300mg/ml 10ml Vial by Beligas Pharmaceuticals

€47.00
Bolden-250 250mg/ml 10x1ml Ampoules by BM PharmaceuticalsLong-Acting Formula

Bolden-250 250mg/ml 10x1ml Ampullen by BM Pharmaceuticals

€48.00
EquiTrex 350mg/ml 10ml Vial by Concentrex LabsBrand Quality

EquiTrex 350mg/ml 10ml Vial by Concentrex Labs

€52.00
EQ 300 300mg/ml 10ml Vial by Dragon-PharmaPro Choice

EQ 300 300mg/ml 10ml Vial by Dragon-Pharma

€44.00